"FINISHING RACES IS IMPORTANT, BUT RACING IS MORE IMPORTANT"
- Dale Earnhardt
VIEW MY CAR COLLECTION IN THE ON ROAD AND OFF ROAD SECTIONS.
SHOP SPACE IS WERE I'VE POSTED SOME PICS OF MY RC WORK AREA
I'VE ALSO LISTED SOME OF MY FAVORITE RC SITES IN THE LINKS SECTION.
ENJOY! AND FEEL FREE TO COMMENT USING THE FORM ON THE CONTACT PAGE.
Make: Team Associated Model: TC-5 Class: 13.5 Sedan 1:10 Motor: LRP 13.5 brushless
Track: 190mm Length: 372mm Width: 182mm Weight: 525g Wheelbase: 259mm Gear Ratio: 2.0:1 4WD dual belt Paint by BodyWorks
Belt drive with adjustable differential heights and belt tension, Blue aluminum outdrives Hardened steel CVAs with cross-pin retaining clips.Blue aluminum clamping wheel hexes. 20 precision ball-bearings.
Blue aluminum bulkheads and motor mount.Woven carbon fiber battery strap.ITF 2mm woven carbon fiber chassis and top plate Front and rear anti-roll bars.
VCS2 shock package.Titanium turnbuckles.3mm woven carbon fiber shock towers.Mono bellcrank steering with adjustable servo saver.Indexed balancing holes in shock towers.
Masdaspeed and Lotus bodies both used on carpet only. I have a few stightly damaged bodies I use for pavement.Paint by Bodywerks on both these.
Make: Tamiya Model: M-05 pro Class: Mini 10:1 Motor: Stock can 540
Tamiya M-05
Tamiya metal shock upgrade Tamiya ball bearings Tamiya blue aluminum parts
Race body
Make: Hot Bodies Model: Cyclone S 1:10 Class: Modified Sedan Motor: 13.5 Xcelorin Brushless
Chassis Length: 365mm Width: 190mm Wheelbase: 258mm Kit Weight: 1480g Drive System: 4WD belt drive Drive Ratio: 2.4375
Upgrades: front aluminum hub cariers, Xcelorin 13.5 Brushless combo.
Full Ball Bearings Adjustable camber links Ball Differential (Front/Rear) Plastic Shocks
Image shows old spec setup Carbon Plastic - Caster Blocks - Front Knuckle Arm - Rear Hubs Aluminium - Motor Mount Plate - Middle Block Plate
Some of the bodies I use. Left one for pavement Paint by Bodywerks and right one on carpet stock Hot Bodies.
Make: Tamiya Model: F104 pro Class: F1 10:1 Motor: Stock can 540 Upgrades: lipo cut off
Length: 410mmWidth: 180mmWheelbase: 270mmTread: 150mm (Front), 145mm (Rear)Tire Width/Diameter: 30/44mm (Front), 35/44mm (Rear)
Carbon lower and upper decksHorizontally mounted motor rear direct drive 2WDBall differentialSymmetrical steering tie rodsSuspension: Kingpin coil spring (Front), T-bar rigid (Rear)Gear ratio4.16:1
This 1/10 scale assembly kit R/C car features a direct drive system which produces sharp handling response. The battery is placed in a new longitudinal position. The
R/C units are positioned on either side of the battery for optimum balance to assists in producing the excellent handling performance.
Make: X-Ray Model: M18 Pro Class: 1:18 scale sedan Motor: Brushless Upgrades: Mamba Max esc
front width: 98~101mm rear width: 104~107mm length: 215mm wheelbase: 149mm ride height: 3~4mm weight; 175g approx. running weight; 390g
• ultra low center-of-gravity (CG) • maximum drivetrain efficiency • drivetrain includes 16 high-speed ball-bearings for maximum efficiency and speed
Make: Kyosho Model: Mini-Z Enzo Ferrari MR-02 MM Class: 28: scale Motor: stock Upgrades: Sticky tires
Length 132mm Width 75.6mm Height 33mm Wheelbase 102mm(3L) Tread (F/R) 66.9mm/64.6mm Tire 23.5×8.5mm/ 27×11mm
Gear Ratio 7.36.35.54.91 Weight 130g (approx.) Motor 130-Class
Losi Micro T all stock other then adding a charge jack on each.
Make: Team Associated Model: RC-10 B-4 Class: 13.5 Buggy Motor: Xcelorin 13.5 Upgrades: LRP parts and Shock upgrade.
Length 366mm Width 246mm Weight 1199g Wheelbase 273mm Internal Gear Ratio 2.6:1 Drive 2WD
UpgradeGraphite/Carbon Parts Top Plate Chassis Front & Rear A-Arms Front & Rear Shock Towers Rear Chassis Brace Battery Strap, woven graphite
Team Associated’s B4 is the latest generation of the 5-time IFMAR World Championship-winning heritage of RC10 buggies.
Total control, in the air and in the dirt. Nimble like a buggy should be.
Make: Axial/DNA Model: Custom Class: Rock Crawler Motor: 55turn brushed Paint by Bodywerks
Vanquish Hurtz Shifter 3 Pos Dig DNA Slingshot Axial Scorpion Chassis Kit
Found the color scheme on the internet of 3 or 4 different trucks. Gave my ideas to Dave of Bodywerks and he did is majic.
Slow and powerfull. A blast to drive.
Not the easiest setup to install all the electronics thank god for ties and velcro.
Original body. Used to beat around the bush. When I do not want to scratch the nice truck...
Make: Traxxas Model: Rustler XL-5 Class: Stadium Truck Motor: Stock 27 brushed Upgrades: Novak GX and Lipo cut off
Length 17.5 inches Front Track 12.25 inches Rear Track 12.25 inches Weight 59.6oz Height 7 inches Wheelbase 11.375 inches
•New large axle carriers with 5x11mm oilite bushings •Efficient Magnum 272™ three-gear transmission with ball bearings. •Sealed gearbox protects the transmission with beefed up motor guard for extra protection.
•Revo®-spec Torque-Control™ slipper clutch system. •External gear cover with easy slipper access. •Reliable planetary gear differential. •Telescoping U-joint driveshafts. •Fiber-composite monocoque chassis.
Great Backyard Basher
Make: Traxxas Model: Slash 3wd Class: Short Course Motor: Xcelorin 13.5 Upgrades: Velenum ESC
Length 22.36 inches Front Track 1.65 inches Rear Track 11.65 inches Weight 76.2oz Height (overall) 8.425 inches Wheelbase 13.2 inches
The new Traxxas Slash Short-Course Race Truck puts you in the drivers seat for intense fender-to-fender, high-flying off-road action.
Upgraded tires and rims. J Concepts Split Six Beadlocks. GooseBups in the front and Calibers in the rear.
Have not spent any money on upgrades as I have so many spares. It's sloppy driving at its best.
> Checkout
RCOttawa
Bodywerks
Dirt Trax
RedRC.com
RC Car Action Magazine
RC Lazy
RC Sites huge listing of many related sites
weather Limoges
other interests
