Call Us 716-799-7788
RV10 Billet Flush Door Handle Kit
Installs easily into new builds or retrofitting into a flying aircraft with factory handles. Handle surface is flush with exterior door skin for clean look and aerodynamic benefit.
$449
Flush Baggage Tie Down
Folds flat out of the way when not in use, flips up for a solid attach point of tie straps.
$29
Billet Door Closure w/Strap
Solid aluminum mount for pullstrap. Comes complete with sewn belt that can cut to size and allen capsrews for flush look. can be engraved on face.
Billet Door Guide Kit
Complete set of Door Guides with Magnetic Pins for two doors. Also included are structural stainless capsrews for easy adjustment from the front.
$99
RV10 Wheelpant Mount
Replaces the factory wheel pant extension mount with a 3/4" hex version. Comes ready to install drilled and tapped. Includes all hardware needed. (also includes replacement large cotter keys for main gear reinstall)
$39
RV10 Nose Wheel Axle
Modeled after time proven Cessna cap style axle. large end caps replace the thin factory spacers for increased surface area, preventing the galling of the fronk forks. No adjustments needed, drop in replacement.
Seat Handle Extension
complete kit includes hardware for two seats. designed to extend the seat handle 2.5 inches for easier access while seated. Made from parkerized steel for strength. Easy install with new roll pins (included).
Flush Door Lock System
Flush lock system install from inside door panel for flush finish. Easily added to any RV10 while building or flying. Stainless lock cyliders keep them trouble free. Kit is for two doors, keyed alike. Baggage door cylinder is available also keyed the same as the doors for 10$(see baggage door cylinder)
Seat Slide Lever
Seat slide lever assembly puts the seat adjustment at your fingertips. sold in kits of two. (left and right) Includes all hardware.
$129
Billet Trim Bracket
Solid aluminum trim bracket for the elevator
$38
HS1008 Horizontal Stab Attach Bracket
Left and right attach brackets, just match drill to spar.
$25
F1095G Trim Cable Anchor Bracket
page 11-8 in manual , includes two
$12
F1095C Trim Cable Bellcrank Brackets
page 11-8 in plans, includes two brackets
F1012D Up Elevator Stop
page 10-13 in plans.
F1011D Bar Support Bracket
Click "add to cart" next the product then visit shopping cart link at top of the page to checkout
©IFLYRV10.COM All Rights Reserved.
Call Us -1-716-799-7788
Premium VINYL IN-STOCK SEAT
Premium Vinyl seat upholstery for RV10. Stocking colors Grey and Tan Two-Tone sold each
$249
Premium VINYL Custom Order
Custom color vinyl seat upholstery for RV10 sold each
Premium LEATHER CUSTOM Seats
Premium Leather seat upholstery for RV10 call for samples. Very fast turn around. sold ea
$429
Floor Carpet Front and Rear
Carpet for front cockpit of RV10
$139
Baggaga Area Carpet
$49
Upholstered Kick Panels
with or without pocket
Fiberglass Front Side Panel Plain
epoxy-glass panels ready to upholster. front kick panel for RV10
$55
RV10 RV7 HID light Kit
$149
MR16 High Intensity LED
$79
HID 35w MR16 set
Our Price: $149.00
Iflyrv10.com 35w MR16 landing light set.
Direct replacement RV wingtip HID lights. These lights will work in any aviation application that utilizes an MR16 bulb. Some application include, Vans RV, Sportsman, Glastar. They can be adapted to any application from an ultralight to a Lancair.
These lights will fit directly in the the RV10 and new RV7 wingtip lights.
Set includes 1 bulb, 1 ballast, and wiring pigtails.
Weight with ballast is 10 oz per side for the complete system.
Specifications:
Luminous Flux: 9 Watt = 410 Lumens
Base Type: MR16 Bi-Pin Base
Beam Angle: 60 Degrees
Diameter: 2 inches
Height: 2.24 inches
LED Quantity: 3
Voltage: 12V DC
Aluminum Stack Fin Housing
Warranty: 5 Years
Comparable to a 45-50 Watt Halogen/Incandescent/Fluorescent
Direct replacement RV wingtip LED lights. These lights will work in any aviation application that utilizes an MR16 bulb. Some application include, Vans RV, Sportsman, Glastar. They can be adapted to any application from an ultralight to a Lancair.
Baggaga Door Lock Cylinder
Door lock cylinder for baggaga door, keyed the same as a flush lock kit when orderd together. This is a standard surface mount
$10
Engine Plenum
IO-540 Engine Plenumm for use with vans baffle kit on an RV10.
$349
Your Product
$0
$250
Need Help ? Mail us- SALES_IFLYRV10.COM
